MAYAH FLASHMAN II, Operating Manual

Page: 63 / 91

Front panel user Interface > Menu structure
63
© 2012 MAYAH Communications
Operating Manual for FLASHMAN II
- Algorithm: AAC (HE)
- Sample rate: 32 kHz
- Bit rate: 64 kbps
- Mode: Stereo
·
Linear Mono:
- Sample rate: 48 kHz
- Bit rate: 768 kbps
- Mode: Mono
·
Linear Stereo:
- Sample rate: 48 kHz
- Bit rate: 1,536 kbps (1.5 mbps)
- Mode: Stereo
A selected quality profile can be activated by stepping to the 'save' icon and
pressing the OK button.
Using optional Old Apt-X or Apt Clear Mode profiles disables
MAYAH automatic codec recognition system FlashCast®. No
connection to devices with different settings is possible while
these profiles are active! To re-enable automatic codec
recognition after using these profiles just choose any other quality
profile and activate it.
3.5.3.2.2.1 Apply codec profile
Simply select the desired profile and press the OK button or cursor button
}
to
step to the 'save' icon which will be displayed inverted.
Press OK button to apply the profile to the current codec configuration.
Current codec settings for both Encoder and Decoder will be changed according
to the quality settings in the profile.
In some rare cases there's an asymmetrical configuration of the
Encoder and Decoder required (e.g. L3 for Encoder and G.722 for
Decoder). For this a workaround can be used with a phone book
entry based on two different profiles and without destination. Such
phone book entry must be "dialed" to apply an asymmetrical quality
settings to Encoder and Decoder.
3.5.3.2.2.2 New codec profile
New quality profiles with the desired coding settings can be created any time in
following ways:
· by using the integrated Web Remote of the FLASHMAN II (Menu SETUP /
Profiles / New)
·
directly on the device by selecting the 'save' icon, pressing the cursor button
€
and choosing the otherwise hidden option 'new'.