MAYAH FLASHMAN II, Operating Manual

Page: 38 / 91

Front panel user Interface > Menu structure
38
© 2012 MAYAH Communications
Operating Manual for FLASHMAN II
Params (Parameters) dialog defines mode and settings of transfer. Two modes
of transfer are possible:
a) FTP
· FTP Client: Active / Passive (default)
· Host: URL or IP-address of the FTP upload server
· User
· Password
· Path: desired path at the FTP upload server (no path means 'root directory')
If the file with the same name already available on the remote
FTP server, it will be overwritten without further notice.
· IFace (Interface): if FTP transfer should be done over some other IP interface
than Ethernet (e.g. over 3G or WLAN) you can set it here
Additional settings for automatic FTP transfer can be found in the
menu
'SYSTEM/MISC/STORAGE'
3.5.1.3 Setup
In this menu item the following recording parameters can be set:
·
Quality (i.e. coding algorithm, bit rate, sample rate etc.)
·
Storage (selection of the storage media)