![background image](http://html1.mh-extra.com/html/maxwell/mw-3057vt/mw-3057vt_manual-instruction_1746422011.webp)
ENGLISH
11
–
Turn the control knob (5) to set the required
ironing temperature: «
•••
» or «
max
»; the pilot
lamp (6) will light up.
–
Once the soleplate (12) reaches the set tem-
perature, the pilot lamp (6) will go out, you can
start ironing.
–
Set the necessary steam intensity with the con-
tinuous steam supply knob (2).
–
In the continuous steam supply mode, steam
will be released from the openings of the sole-
plate (12) only if the iron is in horizontal posi-
tion. To stop the steam supply, put the iron ver-
tically or set the knob (2) to the position «
».
–
After you finish ironing, set the temperature
control knob (5) to the «
min
» position, and the
continuous steam supply knob (2) to the posi-
tion «
».
–
Pull the power plug out of the mains socket and
let the iron cool down completely.
ATTENTION!
If steam is not supplied constantly during the
operation, check whether the steam supply knob
(2) is set properly and whether there is water in the
water tank (10).
If water is leaking from the soleplate (12) openings
during steam ironing, check if the temperature
control knob (5) is set properly and make sure that
the iron soleplate has heated up (the pilot lamp
(6) is off).
BURST OF STEAM
The burst of steam function is useful for ironing
folds and can only be used at high ironing tempera-
tures (when the temperature control knob (5) is set
to the position «
max
»).
When the burst of steam button (4) is pressed,
steam will go out of the soleplate (12) openings
intensively.
Note: To avoid water leakage from the steam
openings, press the burst of steam button (4) with
5-10 sec. intervals.
CLEANING AND CARE
–
Before cleaning the iron, make sure that it is
unplugged and has cooled down completely.
–
Clean the iron body with a slightly damp cloth
and then wipe it dry.
–
Scale on the iron soleplate can be removed with
a cloth soaked in vinegar-water solution.
–
After removing scale, polish the soleplate sur-
face with a dry cloth.
–
Do not use abrasive substances and solvents to
clean the iron soleplate and body.
–
Avoid contact of the iron soleplate with sharp
metal objects.
STORAGE
–
Before you take the iron away for storage, clean
it and drain all the remaining water from the
water tank (10).
–
Set the temperature control knob (5) to the
«
min
» position, and the continuous steam sup-
ply knob (2) to the position «
».
–
Press the lock (8) and fold the handle (3).
–
Wind the power cord.
–
Store the iron vertically in a dry cool place, out
of the reach of children.
DELIVERY SET
Iron – 1 pc.
Beaker – 1pc.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 115–230V ~ 50/60 Hz
Maximal power consumption: 800 W
The manufacturer preserves the right to change
the specifications of the unit without a preliminary
notification
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appliance
was purchased. The bill of sale or receipt must be
produced when making any claim under the terms
of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the Council
Directive 2004/108/ЕС and to the Low
Voltage Regulation (2006/95/ЕС)
MW-3057.indd 11
13.02.2014 15:34:15