Maxwell MW-3052, Manual Instruction

Page: 10 / 32

10
ENGLISH
STEAM IRON MW-3052 VT
The iron is intended for ironing clothes and bed-
ding and for vertical steaming of fabrics.
DESCRIPTION
1.
Water spray nozzle
2.
Water inlet lid
3.
Continuous steam supply and self-clean
knob
4.
Burst of steam button
5.
Water spray button
6.
Handle
7.
Power cord protection
8.
Iron base
9.
Pilot lamp of the heating element
10.
Water tank
11.
Temperature control knob
12.
“MAX” water level mark
13.
Iron soleplate
14.
Beaker
SAFETY MEASURES
Before using the electric unit, read this instruction
manual carefully and keep it for future reference.
Use the unit for intended purposes only, as
specified in this manual. Mishandling the unit can
lead to its breakage and cause harm to the user
or damage to his/her property.
• Before switching the unit on, make sure that
your home mains voltage corresponds to the
iron operating voltage.
•
The power cord is equipped with the “euro-
plug”; plug it into the socket with a reliable
grounding contact.
• To avoid fire, do not use adapters for plug-
ging the unit in.
•
To avoid mains overloading, do not switch on
several electrical appliances with high power
consumption at a time.
• Do not fill the water tank with scented liquids,
vinegar, starch solution, descaling reagents,
chemicals etc.
•
Provide that the power cord is not on the
ironing board and make sure that it does not
touch hot surfaces.
•
Do not leave the unit unattended. During
breaks in operation put the iron on the base
(in vertical position).
• Before plugging/unplugging the iron, set the
temperature control knob to the minimum
position and switch the continuous steam
supply off.
•
Always unplug the iron when you are not
using it.
•
To unplug the iron, always pull its plug, but
not the cord.
• To avoid electric shock, do not immerse the
iron, the power cord and the plug into water
or any other liquids.
•
Before taking the iron away, let it cool down
completely and pour out the remaining
water.
•
Clean the unit regularly.
• Do not immerse the unit body, the power plug
or the power cord into water or any other liq-
uids.
•
Do not touch the unit body and the power
plug with wet hands.
•
Do not allow children to touch the unit body
and the power cord during the unit opera-
tion.
• Do not leave children unattended to prevent
using the unit as a toy.
•
For children safety reasons, do not leave
polyethylene bags used as packaging unat-
tended.
Attention! Do not allow children to play with
polyethylene bags or packaging film. Danger of
suffocation!
•
Do not disassemble the unit by yourself, if
any malfunction is detected or after the unit
was dropped, apply to the nearest authorized
service center.
• Transport the unit in the original package
only.
• Keep the unit out of reach of children and dis-
abled persons.
•
Do not touch the surface of the unit marked
with the symbol
while ironing and after it.
Danger of burns.
THE UNIT IS INTENDED FOR HOUSEHOLD
USAGE ONLY
BEFORE THE FIRST USE
After unit transportation or storage under
cold (winter) conditions, it is necessary to
keep it for at least two hours at room tem-
perature.
–
Unpack the iron, remove the protection from
the iron soleplate (13), if any.
MW-3052.indd 10 01.09.2014 16:25:12