Maxwell MW-3036 G, Manual Instruction

Page: 10 / 36

10
ENGLISH
STEAM IRON
The iron is intended for ironing clothes and bed-
ding and for vertical steaming of fabrics.
DESCRIPTION
1.
Water spray nozzle
2.
Water inlet lid
3.
Continuous steam supply knob
4.
Burst of steam button
5.
Water spray button
6.
Handle
7.
Power cord protection
8.
Base of the iron
9.
Pilot lamp of the heating element
10.
Water tank
11.
Temperature control knob
12.
Self-clean button «Self Clean»
13.
«MAX»
water level mark
14.
Soleplate
15.
Beaker
SAFETY MEASURES
Before using the unit, read this instruction manu-
al carefully and keep it for future reference.
Use the unit according to its intended purpose
only, as it is stated in this user manual. Mishandling
the unit can lead to its breakage and cause harm
to the user or damage to his/her property.
•
Before switching the unit on, make sure that
your home mains voltage corresponds to the
unit operating voltage.
•
The power cord is equipped with a “euro-
plug”; plug it into the socket with a reliable
grounding contact.
•
To avoid fire or electric shock, do not use
adapters for plugging the unit in.
•
To avoid mains overloading, do not switch on
several electrical appliances with high power
consumption at a time.
•
Do not fill the water tank with scented liquids,
vinegar, starch solution, descaling reagents,
chemicals etc.
•
Do not let the power cord run over the ironing
board and touch hot surfaces.
•
Never leave the operating unit unattended.
During operation breaks put the iron on the
base (in vertical position).
•
Before plugging in/unplugging the iron, set
the temperature control knob to the minimum
position and switch the continuous steam
supply off.
•
Always unplug the iron when you are not
using it.
•
To unplug the unit always pull its plug, but
not the cord.
•
To avoid electric shock, do not immerse the
iron, the power cord and the plug into water
or any other liquids.
•
Before taking the iron away, let it cool down
completely and pour out the remaining water.
•
Clean the unit regularly.
•
Do not immerse the unit body, the power plug
or the power cord into water or other liquids.
•
Do not touch the unit body and the power
plug with wet hands.
•
Do not allow children to touch the unit body
and the power cord during the unit operation.
•
Do not leave children unattended to prevent
using the unit as a toy.
•
For children safety reasons do not leave poly-
ethylene bags, used as a packaging, unat-
tended.
Attention! Do not allow children to play with
polyethylene bags or packaging film. Danger of
suffocation!
•
Do not disassemble the iron by yourself, if
any malfunction is detected or after the unit
was dropped, apply to the nearest authorized
service center.
•
Transport the unit in the original package
only.
•
Keep the unit out of the reach of children and
disabled persons.
•
Do not touch the surface of the unit marked
with the symbol
while ironing and after it.
Danger of burns.
THE UNIT IS INTENDED FOR HOUSEHOLD
USAGE ONLY
BEFORE THE FIRST USE
After unit transportation or storage under
cold (winter) conditions, it is necessary to
keep it for at least two hours at room tem-
perature before switching on.
–
Unpack the iron; remove the protection from
the iron soleplate (14), if any.
– Check the unit for damages; do not use the
iron in case of damages.
–
Before switching the unit on, make sure that
your home mains voltage corresponds to the
unit operating voltage.
Note: While the first switching on, the heat-
ing element of the iron burns, therefore
occurrence of foreign smell and a small
amount of smoke is possible, it is normal.