Maxwell MW-3024 BN, Manual Instruction

Page: 11 / 44

11
ENGLISH
Note:
After the iron is switched on the preset
soleplate temperature will be restored after
some time depending on the temperature
control knob position.
STEAM CHAMBER CLEANING
To prolong service life of the iron we recommend
to clean the steam chamber regularly, especially
in the regions with hard tap water.
• Set the continuous steam supply knob (3) to
the position « » (steam supply is off).
•
Fill the water tank (12) till the “MAX” mark (13).
•
Place the iron on its base (9).
• Insert the power plug into the mains socket.
•
Set the control knob (10) to the maximum
soleplate temperature «MAX», the pilot lamp
(6) will light up.
•
When the soleplate temperature (14) reaches
the set value and the pilot lamp (6) goes out,
you can start cleaning the steam chamber.
•
Unplug the unit.
•
Hold the iron above the sink horizontally, press
and hold the self-clean button (11).
• Boiling water and steam with scale will be
intensively released from the soleplate (14)
openings.
• Slightly swing the iron back and forth, until all
water leaves the water tank (12).
•
Place the iron on the base and let it cool down
completely.
•
Once the soleplate (14) cools down complete-
ly, wipe it with a dry cloth.
•
Before you take the iron away for storage,
make sure that there is no water in the water
tank (12) and that the soleplate (14) is dry.
CLEANING AND CARE
•
Before cleaning the iron, make sure that it is
unplugged and has cooled down completely.
• Clean the unit body with a damp cloth and then
wipe dry.
•
Scale on the iron soleplate can be removed
with a cloth soaked in vinegar-water solution.
• After removing scale, polish the soleplate sur-
face with a dry cloth.
•
Do not use abrasive substances to clean the
iron soleplate and body.
•
Avoid contact of iron soleplate with sharp
metal objects.
STORAGE
•
Set the temperature control knob (10) to the
«OFF» position and the continuous steam sup-
ply knob (3) to the position « » (steam sup-
ply is off).
•
Unplug the unit.
•
Open the water inlet lid (2), turn over the iron
and drain any remaining water from the water
tank (12). Close the lid (2).
• Put the iron vertically and let it cool down com-
pletely.
•
Wind the power cord.
• Store the iron vertically in a dry cool place, out
of the reach of children.
Delivery set
Iron – 1 pc.
Beaker – 1 pc.
Instruction manual – 1 pc.
Technical specifications
Power supply: 220-240 V ~ 50 Hz
Power consumption: 2200 W
The manufacturer preserves the right to change
design and specifications of the unit without a
preliminary notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appliance
was purchased. The bill of sale or receipt must be
produced when making any claim under the terms
of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the
Council Directive 89/336/EEC and to
the Law Voltage Regulation (73/23
EEC)
MW-3024.indd 11 26.02.2013 15:31:05