Maxwell MW-3023, Manual Instruction

Page: 13 / 32

13
ENGLISH
•
Scale on the iron soleplate can be removed
with a cloth soaked in vinegar-water solution.
• After removing scale, polish the soleplate
surface with a dry cloth.
•
Do not use abrasives to clean the iron sole-
plate and body.
•
Avoid contact of the iron soleplate with sharp
metal objects.
STORAGE
• Set the temperature control knob (11) to the
position «
OFF », and the continuous steam
supply knob (3) to the position – continu-
ous steam supply is off. Remove the power
plug from the mains socket.
• Open the water inlet lid (2), turn over the iron
and drain any remaining water from the water
tank (10).
•
Close the lid (2).
•
Put the iron vertically and let it cool down
completely.
• Keep the unit out of reach of children and dis-
abled persons.
DELIVERY SET
Iron – 1 pc.
Beaker – 1 pc.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50-60 Hz
Rated input power: 2200 W
Maximum power: 2400 W
The manufacturer preserves the right to change
design, structure and specifications not affecting
general principles of the unit operation without
a preliminary notification due to which insig-
nificant differences between the manual and
product may be observed. If the user reveals
such differences, please report them via e-mail
info@maxwell-products.ru for receipt of an
updated manual.
RECYCLING
For environment protection do not throw out the unit
and the batteries (if included), do not discard the
unit and the batteries with usual household waste
after the service life expiration; apply to specialized
centers for further recycling.
The waste generated during the disposal of the
unit is subject to mandatory collection and con-
sequent disposal in the prescribed manner.
For further information about recycling of this
product apply to a local municipal administra-
tion, a disposal service or to the shop where you
purchased this product.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC Directive
2014/30/EU and to the Low Voltage
Directive 2014/35/EU.