![background image](http://html1.mh-extra.com/html/maxwell/mw-3020-b/mw-3020-b_manual-instruction_1746395010.webp)
10
ENGLISH
10
•
Turn the temperature control knob (11) to
set the required ironing temperature: “•”,
“••”, “•••” or “MAX” (depending on the type
of fabric), set the continuous steam supply
knob (4) to the “0” position, the pilot lamp (6)
will light up.
•
When the soleplate (14) reaches the desired
temperature, the pilot lamp (6) will go out,
you can start ironing.
•
After you finish ironing set the temperature
control knob to the “MIN” position.
•
Pull the plug out of the mains socket and let
the iron cool down completely.
Steam ironing
•
Place the iron on its base (9).
•
Insert the power plug into the mains socket.
•
Make sure that there is enough water in the
water tank (13).
•
Turn the temperature control knob (11) to
set the required ironing temperature: in the
steam operation zone or “MAX” (•••), the
pilot lamp (6) will light up.
•
When the soleplate (14) reaches the desired
temperature value, the pilot lamp (6) will go
out, you can start ironing.
•
Turn the continuous steam supply knob (4)
to set the steam supply rate, steam will start
outgoing from the soleplate (14) openings.
•
After you have finished using the iron set the
temperature control knob (11) to the “MIN”
position, and the continuous steam supply
knob (4) to the “0” position.
•
Pull the plug out of the mains socket and let
the iron cool down completely.
Attention!
If steam is not supplied constantly during the
operation, check the correct position of steam
supply knob (4) and water level in the water tank.
Burst of steam
Burst of steam function is useful when ironing
of folds and can only be used at high ironing
temperatures (when the iron temperature control
knob (11) is set to “•••” or “MAX”).
When pressing the steam supply button (5)
steam will go out of the soleplate.
Note:
– In order to avoid water leakage from steam
openings, press the burst of steam button (5)
with a 4-5 sec. interval.
Vertical steam
Vertical steam function can be used only at
high ironing temperatures (that is when the iron
temperature control knob (11) is set to “MAX”).
Hold the iron vertically at the distance of 15-30
cm from the clothes, press the burst of steam
button (5) with a 4-5 seconds interval, steam will
be supplied from the soleplate (14).
Water spray
•
You can dampen the fabric by pressing the
spray button (3) several times.
•
Make sure that there is enough water in the
water tank (13).
Important information
•
Vertical steam is not recommended for syn-
thetic fabrics.
•
To avoid fabric burning, do not touch it with
iron soleplate while steaming.
•
Never steam clothes on a person as the
steam temperature is very high, use hangers
or a stand.
Steam chamber cleaning
To prolong iron lifetime we recommend cleaning
the steam chamber regularly, especially in the
regions with hard water.
•
Set the continuous steam supply knob (4) to
the “0” position.
•
Fill the water tank (13) till the “MAX” mark.
•
Place the iron on its base (9).
•
Insert the power plug into the mains socket.
•
Set the temperature control knob (11) to the
max. temperature, the pilot lamp (6) will light
up.
•
When the iron soleplate (14) reaches the
desired temperature, the pilot lamp (6) will go
out, you can start cleaning.
•
Unplug the unit.
•
Hold the iron above the sink horizontally,
press and hold the self-clean button (12).
•
Boiling water with scale will be released from
the iron soleplate (14) openings.
MW-3020.indd 10
26.11.2012 12:36:21
Summary of Contents for MW-3020 B
