Maxum 1800MX, Owner'S Manual

Page: 67 / 96

Chapter 7: Deck Equipment
61
2100SC Bimini Top (If Equipped)
1. Slide the windshield hinges of the
main bow (A) over the aft holes in
the side windshield frames and
secure with the attached pins.
2. Hook the aft strap (B) into the deck
loops (C).
3. Unfold the canvas and slide the
windshield hinges of the forward
braces (D) over the forward holes in
the side windshield frames and
secure with the attached pins.
4. Adjust the strap buckles (E) as
needed.
•
The jaw slides (F) should not need to
be adjusted.
•
If you decide to adjust the jaw slide
positions, obtain the correct mea-
surements from your selling dealer.
1900SR3, 2000SR3, & 2200SR3 Bimini Top (If Equipped)
1. Slide the windshield hinges
of the main bow (A) over
the aft holes in the side
windshield frames, and
secure with the attached
pins.
2. Insert the end eyes of the
aft braces (B) into the deck
hinges, and secure them
with the spring loaded
securing pins.
3. Unfold the canvas and
slide the windshield hinges
of the forward braces (C)
over the forward holes in
the side windshield frames
and secure with the
attached pins.
•
Since the jaw slides (D)
were preset during manufac-
turing they should not need
to be adjusted.
•
However, if you think the jaw slides need to be adjusted, obtain the measurements from your selling dealer.
A
D
F
B
C
E
SECURING PIN
WINDSHIELD HINGE
(TYPICAL, 4 - PLACES)
A
C
D
B
END EYE
SPRING LOADED
SECURING PIN
DECK HINGE (TYPICAL, 4 - PLACES)
SECURING PIN
WINDSHIELD HINGE
(TYPICAL, 2 - PLACES)