Maxum 1800MX Owner'S Manual Download Page 49

Page: 49 / 96

Chapter 5: Controls & Gauges

Steering

Rack-and-Pinion Steering System

•

Your boat features a power assisted* rack-and-pinion steering system.

•

For information about the 'power assist fluid reservoir', refer to the engine operation and maintenance manual.

•

Boat steering is not self-centering.

•

Refer to the engine manual for more steering system details.

*3.0L Carbureted engines feature mechanical rack-and-pinion steering.

Shift/Throttle Control

•

Read all of the information about the shift/throttle controls in the Sport Boat Owner’s Manual.

•

Also, read the shift/throttle controls’ manual and the engine manual.

Power Trim and Tilt

•

The stern drive on your boat is equipped with power trim and tilt.

•

Trim and tilt instructions are provided in the engine operation manual and the shifter/throttle manual.

LOSS OF CONTROL HAZARD!

Improper maintenance of shift/throttle hardware may cause a sudden loss of control!

WARNI NG!

Summary of Contents for 1800MX

































































































Search results

Summary of Contents for 1800MX

Reviews:

Related manuals for 1800MX

Brands by name

Popular brands

Maxum 1800MX, Owner'S Manual

Search results

Summary of Contents for 1800MX

Reviews:

Related manuals for 1800MX

Brands by name

Popular brands