GETTING STARTED
Thank you for buying the USB-XBee-Dongle. We hope you will find the USB-
XBee-Dongle to be inexpensive, useful, and easy to use as possible.
Figure 1
If you are new to the USB-XBee-Dongle, we know you will be in a hurry to see it
working. But first, you need to go online and download the product driver and
software supported.
Download and install the USB driver on your PC.
http://www.ftdichip.com/Drivers/VCP.htm
Go to the link above, under VCP driver section selects the driver version which
supported the FT232R device,
and your PC operating system.
If you need more help on installation, you can follow the online installation guide,
http://www.ftdichip.com/Documents/InstallGuides.htm
Download and install the X-CTU software on your PC. This software allows us to
upgrade/restore the RF module Firmware, or change the AT configurations if
necessary.
http://www.maxstream.net/support/xctu/setup_x-ctu.exe
Online XBee/Pro Product Manual,
http://www.maxstream.net/products/xbee/manual_xb_oem-rf-
modules_802.15.4.pdf