1
www.maxsainnovations.com
ASSEMBLY & INSTRUCTION GUIDE
IMPORTANT: PLEASE READ ALL INSTRUCTIONS BEFORE USE.
INDOOR USE ONLY
INCLUDED PARTS
1 Dual Garage Laser Park with Mounting Bracket
3 Screws
1 Double-Stick Tape
HOW TO INSTALL
1. Find a suitable mounting location. The mounting
location should be inaccessible to children or pets.
Detach the mounting bracket from the main unit.
Attach the mounting bracket to the ceiling or
wall as shown with the 3 screws or double-stick
tape. Be sure the bracket is oriented correctly; if
you are mounting it on the ceiling, the arrow on
the mounting bracket graphic below should point
towards the garage door; if you are mounting it
on the wall, it should point towards the ground.
CAUTION: DO NOT USE DOUBLE-STICK
TAPE TO MOUNT THE UNIT TO THE CEILING.
MOUNT SECURELY WITH SCREWS ONLY.
2. To install the batteries, remove the battery
compartment door and install 3 AA 1.5V
batteries, matching the c/- polarity
as shown in the compartment.
3. Slide the main unit into the
mounting bracket as shown.
4. Park your cars in the desired positions. Adjust the
laser beams so that they shine on a prominent feature
on each car. Good choices include a spot on the
dashboard or the space between the hood and the
windshield. Remember, you must be able to see the
spot from the driver’s seat while parking the car.
DO NOT ALLOW THE LASER BEAMS TO REFLECT
OFF A SHINY SURFACE AND INTO YOUR EYES.
5. When either of your cars first enters the garage, the
motion detector will turn on both lasers. Drive forward
until the laser beam for your vehicle hits your pre-
determined spot indicating that you are parked in the
correct position. Both lasers will turn off automatically
after you are parked or you have left the garage.
TROUBLESHOOTING
The Garage Laser Park lasers may sometimes appear to stay on permanently and never
turn off. The Garage Laser Park turns on each time it senses motion. It can be triggered by
any movement in the garage such as a door opening, an animal moving, or a car entering
the garage. As a result, a homeowner may think that the laser never turns off. In these
cases what is usually happening is that each time the homeowner looks in the garage, the
laser is triggered when the door is opened. If you believe that the laser is not turning off,
please check it in a way that the motion sensor will not be triggered.
Model#: 37110
FLASHING LED STOP SIGN
BATTERY-POWERED
DUAL GARAGE LASER PARK
Ceiling or Wall
