471 Brighton Drive
Bloomingdale, IL 60108
MPRC Parabolic
Antenna Series
©2007 PCTEL, Inc.
Broadband Technology Group - Antenna Products
All Rights Reserved
MIS-MPRC-1
Revision A
Printed in the U.S.A.
PRODUCT WARRANTY
A. General Warranty. PCTEL, Inc (“PCTEL”) represents and war-
rants that the Products furnished hereunder shall be free from
defects in material and workmanship for a period of two (2) years
from the date of shipment by PCTEL under normal use and opera-
tion. PCTEL sole and exclusive obligation under the foregoing war-
ranty shall be to repair or replace, at its option, any defective Prod-
uct that fails during the warranty period. The expense of removal
and reinstallation of any item is not included in this warranty. THE
FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE AND ANY WARRANTIES ARISING
FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE
WITH RESPECT TO THE PRODUCTS. Repair or replacement in
the manner provided herein shall be the sole and exclusive remedy
of Buyer for breach of warranty and shall constitute fulfi llment of all
liabilities of PCTEL with respect to the quality and performance of the
Products. PCTEL reserves the right to inspect all defective Products
(which must be returned by Buyer to PCTEL factory freight pre-
paid). No Products will be accepted for replacement or repair with-
out obtaining a Return Materials Authorization (RMA) number from
PCTEL Customer Service [by telephone: 630.372. 6800 or email:
[email protected]]. Products returned without an RMA
number will not be processed and will be returned to Buyer freight
collect. PCTEL shall have no obligation to make repairs or replace-
ment necessitated by catastrophe, fault, negligence, misuse, abuse,
or accident by Buyer, Buyer’s customers or any other parties. The
warranty period of any repaired or replaced Product shall not extend
beyond its original term.
B. Warranty Conditions. The foregoing warranty shall apply only if:
(i) the Product has been properly installed and used at all times in
accordance, and in all material respects, with the applicable Product
documentation; (ii) no modifi cation, alteration or addition has been
made to the Product by persons other than PCTEL or PCTEL’s au-
thorized representatives or otherwise approved by PCTEL; and (iii)
the Product has not been subjected to misuse, neglect or unusual
physical, electrical or electromagnetic stress, or some other type of
accident. C. Disclaimer. PCTEL DOES NOT WARRANT THAT THE
OPERATION OF THE PRODUCTS IS ERROR-FREE OR THAT
OPERATION WILL BE UNINTERRUPTED. IN NO EVENT SHALL
PCTEL BE RESPONSIBLE FOR DAMAGES OR CLAIMS OF ANY
NATURE OR DESCRIPTION RELATING TO (i) SYSTEM PERFOR-
MANCE, INCLUDING COVERAGE, (ii) BUYER’S SELECTION OF
PRODUCTS FOR BUYER’S APPLICATION AND/OR (iii) FAILURE
OF PRODUCTS TO MEET GOVERNMENT OR REGULATORY
REQUIREMENTS.
RETURNS
In the unlikely event a defect occurs in this product, please work
through the dealer or distributor from which this product was pur-
chased. PCTEL, Inc. provides complete service and support to all of
its dealers and distributors.
P00263 Contents:
(A) 1 - azimuth fi ne adjustment bar
(B) 1 - 3/8” x 16 x 1” hex head bolt
(C) 3 - 7/16” ID x 1” OD fl at washer
(D) 3 - 3/8” split lock washer
(E) 3 - 3/8” - 16 hex nut
Step 5.
Elevation adjustment.
Loosen pivot bolts (3 locations). Loosen elevation rod nut and set
elevation angle.
Step 6.
Azimuth adjustment. Loosen bracket nuts and rotate antenna on
mounting pipe for proper azimuth positioning.
Attach fi ne azimuth adjustment kit P00263. Loosen bracket nuts (4
locations). Turn azimuth rod nut and set azimuth angle.
C
D
E
C
D
E
A
B
When alignment is completed tighten all hardware.
Loosen
bracket nuts
