background image

SM-2000 Series Limited Warranty*

Maxon America, Inc. (“Maxon”) warrants the Maxon
Product manufactured by it against defects in material
and workmanship under normal use and service for two
(2) years from the date of delivery to the original end user,
provided that the user has complied with the requirements
stated herein. This warranty is not assignable or transfer-
able.

Maxon shall have no obligation to make repairs or to cause
replacement required which result from normal wear and
tear or necessitated in whole or in part by catastrophe, fault
or the negligence of the user, improper or unauthorized
alterations, repairs to the Product, use of the Product in a
manner for which it was not designed, or by causes
external to the Product. This warranty is void if the serial
number is altered, defaced or removed.

Maxon’s sole obligation hereunder shall be to repair or
replace the Product covered in the above warranty.

To receive warranty service, deliver or send the Product,
transportation and insurance prepaid, to the place of
purchase along with your proof of purchase. Alternatively,
call 1-800-821-7848 for other locations or authorization to
return the Product directly to Maxon.

THE EXPRESS WARRANTIES CONTAINED HEREIN ARE
IN LIEU OF ALL OTHER WARRANTIES, EITHER
EXPRESSED OR IMPLIED OR STATUTORY, INCLUD-
ING, WITHOUT LIMITATION, ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.

17

Summary of Contents for sm-2000 series

























Reviews: