General Information
About this Document
«EC frameless DT» Installation Manual
1-4
mmag | 2021-12 | rel10341
Table 1-2
Symbols and signs
1.1.5
Trademarks and Brand Names
For easier legibility, registered brand names are listed below and will not be further tagged with their respec-
tive trademark. It must be understood that the brands (the list below is not necessarily concluding) are pro-
tected by copyright and/or other intellectual property rights even if their legal trademarks are omitted in the
later course of this document.
Table 1-3
Brand names and trademark owners
1.1.6
Copyright
This document is protected by copyright. Any further use (including reproduction, translation, microfilming,
and other means of electronic data processing) without prior written approval is not permitted. The men-
tioned trademarks belong to their respective owners and are protected under intellectual property rights.
© 2021 maxon. All rights reserved. Subject to change without prior notice.
mmag | «EC frameless DT» Installation Manual | Edition 2021-12 | DocID rel10341
Information
Requirement
Note
Remark
Indicates an activity you must perform prior continuing,
or gives information on a particular item you need to
observe.
Best practice
Indicates an advice or recommendation on the easiest
and best way to further proceed.
Material
damage
Indicates information particular to possible damage of
the equipment.
Brand Name
Trademark Owner
DELO-ML®
© DELO Industrie Klebstoffe GmbH & Co. KGaA, DE-Windach
EPO-TEK®
© Epoxy Technology, Inc., USA-Billerica, MA
Loctite®
© Henkel AG & Co. KGaA, DE-Düsseldorf
NORD-LOCK®
© Nord-Lock International AB, SE-Malmö
omniFIT®
© Henkel AG & Co. KGaA, DE-Düsseldorf
Pico-Clasp
© Molex, USA-Lisle, IL
maxon motor ag
Brünigstrasse 220
CH-6072 Sachseln
+41 41 666 15 00
www.maxongroup.com
Type
Symbol
Meaning
