11921
Slauson
A
ve.
Santa
Fe
Springs,
CA.
90670
(800)
227-41
16
FA
X
(888)
771-7713
PAGE 34
PLATFORM LOWERS UNEVEN
1.
Lower the Platform to the ground and
remove the Pressure Compensation
Valves located at the top of each
Column. Disassemble and clean each
valve. Reinstall, or replace as necessary
using the thread Sealant Instructions on
the inside back cover of this manual.
PRESSURE
COMPENSATION
VALVE
2.
Drain all the Hydraulic Oil from the Reservoir. Install a Filter Kit
(P/N 260578), between the “C” Valve and the Reservoir. Instructions
on how to do this (M-95-27), are included in the Kit. Clean or replace
the Filter if the Filter Kit is already installed.
Summary of Contents for BMR-35
Page 48: ......
