Maintenance
Care & Maintenance
22
maxon BIKE
DRIVE
| User Manual | rel8583
2.1.5 Cleaning the PowerGrip
Heavy soiling can keep the PowerGrip from moving freely and can prevent it
from automatically bouncing back when «Boost» is released. In this case you
will need to dismantle and clean the PowerGrip. Your specialized dealer uses
for this purpose the «PowerGrip Service Tool» (533408), a special tool that you
may purchase.
2.1.5.1
Removing the PowerGrip
1) Loosen screw cap and unplug Control Cable from PowerGrip.
2) Loosen mounting screws on PowerGrip (and handlebar grip, if any).
3) Pull off handlebar grip and PowerGrip from handlebar.
2.1.5.2
Dismantling the PowerGrip
IMPORTANT
During disassembly, exposed parts can easily be damaged. Exercise caution.
Hold
PowerGrip
1) Take the PowerGrip (A) with
one hand.
Position
«PowerGrip
Service Tool»
2) With the other hand, posi-
tion the «PowerGrip Service
Tool» (B) right-angled at the
PowerGrip.
Lift off snap-
in claws
IMPORTANT
Ensure concentric position of the
parts.
3) Carefully push «PowerGrip
Service Tool» in axial direc-
tion between snap-in claws
and twist grip while moving
slightly back and forth at the
same time.
4) Insert «PowerGrip Service
Tool» up to the stop (approx-
imately 1 mm deep) and hold
in this position.
