About
About this Document
ESCON 36/2 DC Hardware Reference
1-4
CCMC | 2021-08 | rel9011
1.1.4
Symbols & Signs
In the course of the present document, the following symbols and signs will be used.
Table 1-2
Symbols & Signs
1.1.5
Trademarks and Brand Names
For easier legibility, registered brand names are listed below and will not be further tagged with their respec-
tive trademark. It must be understood that the brands (the list below is not necessarily concluding) are pro-
tected by copyright and/or other intellectual property rights even if their legal trademarks are omitted in the
later course of this document.
Table 1-3
Brand Names and Trademark Owners
Type
Symbol
Meaning
Safety Alert
(typical)
DANGER
Indicates an
imminent hazardous situation
. If not
avoided, it
will result in death or serious injury
.
WARNING
Indicates a
potential hazardous situation
. If not
avoided, it
can result in death or serious injury
.
CAUTION
Indicates a
probable hazardous situation
or calls the
attention to unsafe practices. If not avoided, it
may
result in injury
.
Prohibited
Action
(typical)
Indicates a dangerous action. Hence,
you must not
!
Mandatory
Action
(typical)
Indicates a mandatory action. Hence,
you must
!
Information
Requirement /
Note / Remark
Indicates an activity you must perform prior continuing,
or gives information on a particular item you need to
observe.
Best Practice
Indicates an advice or recommendation on the easiest
and best way to further proceed.
Material
Damage
Indicates information particular to possible damage of
the equipment.
Brand Name
Trademark Owner
Windows®
© Microsoft Corporation, USA-Redmond, WA