Maxon 403112, Hardware Reference Manual, Page: 18 / 44

Setup
Connections
ESCON 36/2 DC Hardware Reference
3-18
CCMC | 2021-08 | rel9011
Table 3-16 Encoder Cable
SOCKET J4A
Figure 3-7 Encoder Socket J4A
Table 3-17 Encoder Socket J4A – Pin Assignment
Encoder Cable (275934)
Cable cross-section 10 x AWG28, round-jacket, flat cable, pitch 1.27 mm
Length 3 m
Head A DIN 41651 female, pitch 2.54 mm, 10 poles, with strain relief
Head B DIN 41651 Plug, pitch 2.54 mm, 10 poles, with strain relief
J4A &
Head A
Prefab
Cable
Head B
Signal Description
Pin Color Pin
1
not connected –
2
+5 VDC Encoder supply voltage (+5 VDC;
≤
70 mA)
3
GND Ground
4
not connected –
5
Channel A\ Channel A complement
6
Channel A Channel A
7
Channel B\ Channel B complement
8
Channel B Channel B
9
not connected –
10
not connected –