maxon motor
EPOS 24/5 Getting Started
EPOS Positioning Controller
8.
‘Startup Wizard’
Step 6 for EC motors: Position Sensor
Type
a)
Select the used position sensor type
Figure 17: Startup wizard dialog for choosing
EC moto position sensor type
r
b)
Click the button ‘Weiter’ for the next step.
c)
Important remarks for using Hall
sensors: For a proper function of the
regulation, please be aware of the
following restrictions.
Figure 18: Recommendations for using Hall
sensors as position sensors
d)
Please consider this warning carefully
before clicking the ‘Accept’ button for the
next step.
8. ‘Startup
Wizard’
Step 6 for DC motors: Position
Resolution
a)
Enter the resolution of the used encoder.
Figure 19: Startup wizard dialog for setting
DC motor encoder resolution
b)
Click the button ‘Weiter’ for the next step.
December 2008 Edition / document number 573050-07 / subject to change
maxon motor control
17
