Operating Instructions
LED Desk Lamp
MaxLite LED Desk Lamp
WARNING:
RISK OF ELECTRICALSHOCK
• Turn off the power when you perform any
maintenance.
• Verify that supply voltage is correct by
comparing it with the luminaire label
information.
CAUTION:
RISK OF INJURY
• Avoid direct eye exposure to the light source while it is on.
• Account for small parts and destroy packing material, as these may be hazardous to children.
Model Numbers:
ML7L4USB30XX
Where:
XX = BK (Black) & WH (White)
Ex. ML74USB30BK
This device complies with Part 15 of the FCC Rule. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
© Copyright 2017. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: 973-244-7300 Fax: 973-244-7333 Email: [email protected]
Page: 1
REV: 07/17/17
®
General Safety Information
• To reduce the risk of death, personal injury or property
damage from fire, electric shock, falling parts,
cuts/abrasions, and other hazards read all warnings
and instructions included with and on the fixture box
and all fixture labels.
• Before installing, servicing, or performing routine
maintenance upon this equipment, follow these general
precautions.
• For Residential installation: If you are unsure about the
installation or maintenance of the luminaires, consult a
qualified licensed electrician and check your local
electrical code.
• DO NOT INSTALL DAMAGED PRODUCT!
• The external flexible cable or cord of this luminaire cannot be replaced; if the
cable or cord is damaged, the luminaire shall be destroyed.
• To avoid injury or damage to the fitting, ensure that power leads and screws
are secure before connecting the power.
• Young children should be supervised to ensure that they do not play with the
portable lamp.
• Handle the fitting and/or shade with care to avoid any damage or breakage.
• Select a suitable location away from liquids and hazards.
• Ensure that the fitting does not come in contact with corrosive
chemicals, etc.
• To clean, wipe with a damp clean cloth. Never soak the fixture with water.
