Maximum 054-7276-4, Instruction Manual

Page: 11 / 24

11
OPERATION INSTRUCTIONS
ATTACHING THE SANDPAPER (fig 1)
1. Unplug the sander.
2. Disengage the sandpaper clamp by
pushing the wire clamp on the side of
the sanding pad towards the sander
body.
3. Line up the edge of the sandpaper with
the edge of the sanding pad. Insert the
sandpaper under the clamp. To lock
the sandpaper in place, engage the clamp.
4. Disengage the clamp on the other side of the sander. Stretch the sandpaper
tightly over the foam pad and insert the outer edge under the clamp at the
rear of the sander.
5. Align the edge of the sandpaper with the edge of the sanding pad. To lock
the sandpaper in place, engage the clamp.
OPER
A
TING INS
TRUCTIONS
WARNING!
• Never connect the sander to the power source when you are
assembling parts, making adjustments, installing or removing
sandpaper, cleaning, or when it is not in use. Disconnecting the
sander will prevent accidental starting, which could cause serious
personal injury.
FPO
NOTICE:
Before attaching a new sanding sheet, remove any dust or debris
from the sanding pad.
fig 1
Sandpaper
clamp