21
DIP switch No. 4
specifications (page 20)
When the switch is in position:
Once two detection events are received,
the Alarm Relay will be activated for the
time it was set (default 2 seconds), but if
additional detection events are received
right afterwards (within 1 second), the
Alarm Relay will be activated for an
additional 2 seconds.
Example:
The Alarm Relay time wasn't changed (by
the Remote Control RM-1 that can be
purchased separately) so Alarm Relay
time remains on the default time of 2
seconds.
If two detection events are received and
within the next half a second the detector
detected additional detection events, the
Alarm Relay will be activated for 4
seconds consecutively (default time of 2
seconds plus additional 2 seconds since
additional detection events were received
during a half second right after the two
detection events.
2
3
