Evaluate: MAX2654/MAX2655/MAX2656
MAX2654/MAX2655/MAX2656 Evaluation Kits
________________________________________________________________
Maxim Integrated Products
1
19-1872; Rev 0; 1/01
Component List MAX2654
DESIGNATION
QTY
DESCRIPTION
C1
1
6pF ±0.5pF ceramic capacitor
(0402), Murata GRM36COG060D050A
C2
1
1.6pF ±0.1pF ceramic capacitor
(0402), Murata GRM36COG1R6B050A
C3, C8
2
100pF ±5% ceramic capacitors
(0603), Murata GRM36COG101J050
C4
1
22pF ±5% ceramic capacitor
(0603), Murata GRM36COG220J050
C5
1
4.7µF tantalum capacitor ‘C’ case
AVX TAJC475K020
C6
1
Not installed
R4
1
0
Ω
resistor (0603)
R5
1
10k
Ω
±1% resistor (0402)
L1
1
5.6nH inductor
Murata LQW1608A5N6C00T1
L2
1
0nH
inductor (0402)
U1
1
MAX2654EXT 6-pin SC70
RFIN, RFOUT
2
SMA connectors (edge mount)
tab contact, EFJohnson 142-0701-851
VCC, GND
2
Test points, Digi-Key 5000K-ND
JU1
1
1
✕
3 header (0.1in centers)
Digi-Key S1012-36-ND
JU1
1
Shunt, Digi-Key S9000-ND
—
1
MAX2654 EV kit circuit board, rev A
Component List MAX2655
DESIGNATION
QTY
DESCRIPTION
C1
1
1800pF ±10% ceramic capacitor
(0402), Murata GRM36X7R182K050A
C2
1
1.5pF ±0.1pF ceramic capacitor
(0603), Murata GRM39COG1R5B050A
C3, C8
2
100pF ±5% ceramic capacitors
(0402), Murata GRM36COG101J050A
C4
1
12pF ±5% ceramic capacitor (0603)
Murata GRM39COG120J050A
C5
1
4.7µF tantalum capacitor ‘C’ case
AVX TAJC475K025
C6
1
Not installed
C7
1
27pF ±5% ceramic capacitor (0402)
Murata GRM36COG270J050A
R1
1
698
Ω
±1% resistor (0603)
R2
1
511
Ω
±1% resistor (0603)
R3
1
357
Ω
±1% resistor (0603)
R4
1
0
Ω
resistor (0603)
R5
1
10k
Ω
±1% resistor (0402)
L1
1
5.6nH inductor
Murata LQW1608A5N6C00T1
For price, delivery, and to place orders, please contact Maxim Distribution at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
General Description
The MAX2654/MAX2655/MAX2656 evaluation kits
(EV kits) simplify evaluation of the MAX2654/MAX2655/
MAX2656 low-noise amplifiers (LNAs). These kits
enable testing of the devices’ performance and require
no additional support circuitry. The signal input and out-
put use SMA connectors to facilitate connection of RF
test equipment.
The MAX2654/MAX2655/MAX2656 EV kits are fully
assembled with the MAX2654/MAX2655/MAX2656 on
board, and incorporate input matching components opti-
mized for specific frequency operation.
Features
♦
Easy Evaluation of MAX2654/MAX2655/MAX2656
♦
+2.7V to +5.5V Single-Supply Operation
♦
RF Input and Output Matched to 50
Ω
♦
Jumper Included for Gain/Shutdown Setting
♦
Fully Assembled and Tested
Ordering Information
PART
TEMP. RANGE
IC PACKAGE
MAX2654
EVKIT
-40°C to +85°C
6 SC70-6
MAX2655
EVKIT
-40°C to +85°C
6 SC70-6
MAX2656
EVKIT
-40°C to +85°C
6 SC70-6
