MAX32600 User’s Guide
System Configuration and Management
4.1 Power Ecosystem and Operating Modes
4.1.12.1.6
PWRMAN_WUD_PULSE0
Default
Access
Description
n/a
W/O
WUD Pulse To Mode Bit 0
Writing to this register issues a pulse to the selected WUD pad mode[0] for one clock.
The effect on the pad behavior depends on the Wake-Up Pad Signal Mode as set in WUD_CTRL.
• 0 = Clr WUD/Weak
• 1 = Set WUD Act Hi
• 2 = Set Weak Hi
• 3 = No pad state change
4.1.12.1.7
PWRMAN_WUD_PULSE1
Default
Access
Description
n/a
W/O
WUD Pulse To Mode Bit 1
Writing to this register issues a pulse to the selected WUD pad mode[1] for one clock.
The effect on the pad behavior depends on the Wake-Up Pad Signal Mode as set in WUD_CTRL.
• 0 = WUD Activate
• 1 = Set WUD Act Lo
• 2 = Set Weak Lo
• 3 = No pad state change;
4.1.12.1.8
PWRMAN_WUD_SEEN0
PWRMAN_WUD_SEEN0.[gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7]
Rev.1.3 April 2015
Maxim Integrated
Page 53
