Maxim Integrated DS8005, Getting Started, Page: 18 / 22

Figure 19. Selecting the COM port for the Serial JTAG Adapter in Rowley.
Next, select Target Connect Maxim Serial JTAG Adapter to connect to the USB-to-serial adapter
( Figure 20 ). If successful, a message on the bottom left of the window will confirm the connection and a status
indicator at the bottom right of the window will show a yellow circle and “Maxim Serial JTAG adapter” ( Figure
21 ).
Figure 20. Connecting to the Serial JTAG Adapter in Rowley.
Figure 21. Serial JTAG adapter connection status. The left message shows feedback on the connection status,
and the message on the right shows that the serial JTAG adapter is connected and idle.
Page 18 of 22