Compiling, Debugging, and Running Code in Rowley CrossWorks
The example code in this evaluation kit was written and tested with version 2.1.0.2011101107.12397 of Rowley
CrossWorks. This section describes how to compile, run, and debug the example code with Rowley. It may be
necessary to reconnect the USB-to-serial adapter to avoid problems while trying to connect to the device.
Start CrossStudio for MAXQ 2.1 and select
File
Open…
from the menu. Locate and open the example
code’s project file DS8005_EK.hzp (
Figure 16
).
Figure 16. Opening the sample code project file in Rowley.
All the project options should be correctly set. From the menu, select
Build
Rebuild DS8005_EK
to rebuild
the example code (
Figure 17
). The output message below will show that the build completed successfully, as
well as a summary of flash and RAM usage.
Page 16 of 22