Application Drawings
Vi30103 Drop and Insert 60W PoE+ 3-Port Switch User’s Manual
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION
CAUTION:
TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Installation (Powered by PoE)
The Smart Choice for Transmission Solutions
www.vigitron.com
Important Safety Warning
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Install in accordance with the manufacturer’s instructions.
- This installation should be made by a qualified service person and should
conform to all local codes.
- DO NOT bundle UTP or Coax signals in the same conduit as high-voltage
wiring.
- To reduce the risk of fire or electrical shock, do not expose these products
to rain, moisture, dripping or splashing.
- No objects filled with liquids, such as vases, shall be placed on Vigitron
equipment.
- DO NOT install the unit in a place where the operating ambient tempera
ture exceeds 60°C.
- Make sure that the external power supply output voltage is in the recom
mended range.
- Do not install near any heat sources such as radiators, heat registers,
stoves or other apparatus that produce heat.
- Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long
periods of time.
- Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as a power
supply cord or plug is damaged, liquid has been spilled, or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
- The power plug and the PoE input cable are used as the disconnect
device and shall remain readily
WARNING! - To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture. This apparatus shall not be exposed to
dripping or splashing and no objects filled with liquids, such as vases shall
be placed on the apparatus.
WARNING! - This apparatus is a Class I product. This product must
be connected to a mains socket outlet through an AC to DC Power supply.
WARNING! - The mains plug is used as the disconnect device and
shall remain readily operable.
Vi30103_UM
The Vi30103 is a 3-port Layer 2 PoE switch providing drop and insert
capability for connecting several IP devices along a single cable run. The
Vi30103 provides a cost effective method for increasing distances beyond
the standard Ethernet limit of 328 feet (100m). Multiple units can be
cascaded to provide up to nine IP cameras to be connected to a single
network switch port over distances of up 3,000 feet (909m)
.
For small systems the Vi30103's Layer 2 network capability can eliminate
the need for network switches saving costs and rack space. It also can
significantly decrease network switch costs by increasing the port capacity
of the switch. As a mini network switch, the Vi30103 avoids the potentials
for transmission collisions by complying with IEEE standards. It is an easy
and quick solution to add an extra camera without requiring to have a new
home-run cable.
The Vi30103 can be powered by a 60W PoE source or a local power
supply. Additional power up to 60W can be inserted at any point along the
cable run where power outlets are available and provide the ability to power
IP cameras up to 30W per port.
a) Power Connection:
- Connect power connector to Vi1120 120W desktop power supply for using
full PoE capacity of Vi30103.
b) Port-1 (PoE-In) Connection:
- Connect Port-1 of Vi30103 to the network switch using a standard Cat5/6
cable of maximum 100m in length.
c) Ports-2 & 3 (PoE-Out) Connection:
- Connect Port 2 & 3 of a Vi30103 to IP cameras or similar devices using
standard Cat5/6 cables of maximum 100m in length. These ports can also
be connected to Port 1 of another Vi30103. The maximum PoE power
available at each port is 30W.
Installation (Powered by Local Power Supply)
a) Port-1 (PoE-In) Connection:
- Connect Port 1 of Vi30103 to the PoE switch or a high power PoE source
using a standard Cat5/6 cable of maximum 100m in length. This port can
receive up to 60W PoE and data 10/100Mbps.
b) Port-2 & 3 (PoE-Out) Connection:
Ports 2 and 3 can be used to either connect an IP camera or to port 1 of
another Vi30103. Use a standard Cat5/6 cable of maximum 100m in length
to connect the IP camera. Ports 2 and 3 can each provide up to 30W of PoE
power when powered by an external power supply or 60W input PoE.
Max
ii
Net
TM
Vi30103
Network Switch
Providing PoE to 2 Cameras using a Local Power Supply
Cat 5/6
Data
328 ft. (100m)
Power
Supply
Data +
30W PoE
328 ft. (100m)
Data +
30W PoE
328 ft. (100m)
Data +
60W PoE
328 ft. (100m)
Vi30103 allows for the transmission of two cameras over a single cable run or adding a new
camera close to an existing camera.
Vi30103 allows for the transmission of two cameras over a single cable run or adding a new
camera close to an existing camera. The PoE Midspan provides power to the Vi30103 and
both cameras.
NVR
A total of 9 IP addresses can be accessed on a single cable run eliminating the need for
network switches.
Vi30103
Power
Supply
Vi30103
Vi30103
Power
Supply
9xVi30103 for total of 3,280 ft. (1,000m)
Vi30103
PoE Switch
Data
328 ft. (100m)
Data +
30W PoE
328 ft. (100m)
Data +
30W PoE
328 ft. (100m)
Data +
30W PoE
328 ft. (100m)
Data +
30W PoE
328 ft. (100m)
PoE Camera
Data +
30W PoE
328 ft. (100m)
PoE
Camera
PoE
Camera
PoE
Camera
PoE
Camera
PoE
Camera
PoE
Camera
PoE
Camera
Data +
30W PoE
328 ft. (100m)
Data +
30W PoE
328 ft. (100m)
Providing PoE to 2 Cameras using input PoE
Drop and Insert Application
