PARAMETERS
www.maxcessintl.com
DLCA NET-S1
MI 850A374 1 A
Page 39 of 67
7.7
Password
Parameter Description
Range
P.00
Password
When the DLCA NET-S1 is locked, all parameters will be
viewable but cannot be changed and no calibrations can be
performed.
To lock or unlock the DLCA NET-S1 press [Enter] to show the
lock and unlock status, displayed as ULOC for unlocked and
LOC for locked.
To lock the DLCA NET-S1 the password must be entered
twice. To unlock the DLCA NET-S1 the password only needs
to be entered once.
To lock the DLCA NET-S1
Press [Enter] again and the display will show PAS1, press
[Enter] and enter the password using the [+] and [-] buttons.
Pres and hold [Enter] for two seconds to enter the password.
The display now shows PAS2. Press [Enter] and enter the
same password using the [+] and [-] buttons. Press and hold
[Enter] for two seconds to enter the password.
The display now shows LOC for locked. Press [Enter] to
return to displaying tension.
To unlock the DLCA NET-S1
Press [Enter] again and the display shows PAS1. Press [Enter]
and enter the password using the [+] and [-] buttons. Press
and hold [Enter] for two seconds to enter the password.
The display now shows ULOC if the correct password was
entered. Press [Enter] to return to displaying tension.
If the password was incorrect, the display shows LOC and the
DLCA NET-S1 is still locked. Press [Enter] to return to
displaying tension, and then repeat the unlock procedure.
The backdoor code is 6195.
{0, 9999}
