3-1
DISPLAY DEFINITIONS
www.maxcessintl.com
FIFE-500-XL
MI 2-267 1 D
Display Definitions
The FIFE-500-XL uses a QVGA Touchscreen for Operator command inputs and status
displays.
This Control Panel is divided into five sections of information for which brief descriptions
follow. Refer to Figure 1 for the button locations in the standard, horizontal Control Panel.
The vertical section on the left side contains the Operation Mode selection buttons
(Automatic, Servo Center, and Manual) and indicates the current Operation Mode
selection by displaying the corresponding button in a green color. (Other buttons are
blue).
The horizontal section at the top, above the line, contains the status bar which always
contains the screen number. It may also indicate statuses, errors, and digital I/O.
The middle section indicates the current Operation Mode, the selected sensor signal level
in a bar graph, and the position of the system guide point. This section also contains
buttons for Guidepoint Shift and Guidepoint Reset.
The lower middle section contains the Left and Right Jog buttons.
The vertical section on the right side contains the Sensor Selection and Setup buttons
and indicates the current Sensor Mode selection by displaying the proper sensor symbol
in the Sensor Select button.
Figure 1.
FIFE-500-XL CONTROL PANEL
(0° AND 180° ROTATION)
