P.05
How to Use
• Remove the adaptor cover at the bottom of the charging base. (see fig. 1 )
• Put the 9V adaptor to the hole of the adaptor compartment, (see. Fig 2) then put back the
adaptor cover and push the clip of the cover to the front in order to lock it. . (see Fig. 3)
• The adaptor jack will be fixed firmly on the charging base (see Fig. 4), insert the adaptor AC
cable plug into wall outlet and then put the Massager Device on the charging base for
charging (See Fig. 5)
• The charging indicating light on the Massage Device (above the control button) will start
blinking in red. The charging indicating light will turn blue when the device is fully charged.
(The Device cannot be used during charging)
• Charge for 3~4 hours for full charge and the device can be used continuously for approx. 90
minutes.
Operation Instruction
• Choose a suitable massaging head and install it to the Massager.
• Press and hold the power switch for 3 seconds for start up the Massager, then the blue LED
ring will light up and it will start at LOW level, press button again to switch to MID level and
you can press the button again to switch to HI level.
• When using the HEAT treatment, please use the Thermo Head and press the Thermo On/
Off button on the back of the massager (the heating function can only be applied with the
Thermo Head). Once the Thermo Button is turned on, the red LED light ring on the Thermo
Head will light up. Then press the power switch to start the massage. Remember to turn off
the Thermo Button after the massage.
• Before using the COLD treatment, you need to put the cold head into freezer for few hours
in order to make it cold.
• Then change to Cold Head and press the power switch once to start the cold treatment.
• The massager presets with 10 minutes auto-off timer.
• When the power supply is slow, please put the massager to the charging base for charging.
Reminder : You must turn off the massager before changing the massage head.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Hot Treatment
Press the
button to start
the thermo
treatment
Red LED
light ring will
light up.
Thermo plate
Summary of Contents for MAX Pro 2.0
