Max MAX STORM 4, User Manual

Page: 6 / 30

6
ENG
USER’S GUIDE DESKTOP NAIL DUST
COLLECTOR MAX STORM 4
General description
The MAX Storm 4 nail dust collector is designed for use by professional
manicurists. It serves to remove dust, which appears in the process of nail filing
and to remove of artificial coatings.
Usage of the nail dust collector is recommended:
• during gel and acrylic nail extension, nail correction;
• while removing of gel polish and other artificial coatings;
• when performing manicure (especially hardware one).
•
Complete set
1. Dust collector with a filter bag installed.
2. Additional filter bag.
3. Passport.
Operational principles
The manicurist works in the dust collector fan grill area. The dust-air mixture is
sucked with the fan impeller of the dust collector. Clean air flows back into the
room after its filtration through the bag filter. Dust is collected inside the filter.
The manicurist cleans the filter bag after finishing.
Usage
1. Put the filter bag on the fan. The bag must be placed parallel to the side
panels of the device with a dart towards the body. Do it carefully. The filter
bag should be placed along the whole surface of the fan.
2. Place the device on a stable, flat surface. The side with the grill must be
facing you. Make sure that the bag is fixed evenly and does not fall under
the side panel of the device.
3. Before switching on, make sure that there are no foreign objects between
fan blades.
4. Insert the plug into a mains socket 220V. Use the switch located on the side
panel of the dust collector to turn it on and off. After the first switching on, it
is recommended to lift the dust collector and make sure that the filter bag is
puffed and nothing disrupts the air flow.
5. Work in the area of the dust collector fan impeller approximately 1.5 cm away
from the edge of the grill to the center.
Safety measures
• Do not allow hands or foreign matter entering into the moving blades of the
fan.