- 7 -
DISPLAY LAYOUT
(A)
The
symbol appears during the period of Daylight Saving Time.
(B)
The
symbol appears during settings are protected by password.
(C)
The
symbol appears during setting mode.
HOW TO OPERATE
CAUTION
Install this instrument on a level place.
Do not install on or near a place subject to vibration.
1.
AUTOMATIC OPERATION
ER-1600 shifts the column for printing automatically in the order of
IN1
,
OUT1
,
IN2
and
OUT2
without the user pressing any external keys.
1. Insert time card to the position where automatic feed starts.
2. Time card will be ejected automatically after printing the time.
2. MANUAL OPERATION
ER-1600 allows manual operation for shifting the column to be printed on.
1. Select a desired column to print on the time card by pressing
IN1,
OUT1, IN2
or
OUT2
key.
2. The
symbol appears at the selected column on the display.
3. Insert time card to the position where automatic feed starts.
4. Time card will be ejected automatically after printing the time.
1. Do not keep holding the time card during printing.
2. Do not pull or push time card with your hand.
3. Do not cover any of the small holes at both edges on time card.
1. If
E-01
appears on the display, the time card has been
inserted incorrectly.
(See [13] on page 21)
2. When using Daily Total Time from MODE 1, ER-1600 automatically
prints the Total Time in the 5
th
column after printing the time in the
4
th
column.
- 8 -
SETTING OR CHANGING DATA
Operation
1.
Press CANCEL key for 3 sec. or more. The symbol appears on the display.
2.
After setting or changing data, press the CANCEL key again.
The symbol disappears.
Password protection for settings
Password is required for settings after you set it up in setting MODE1. (See [6 ] on page 13)
Making note of the Password and keep it in a safe
place to prevent it from being lost or used by an un-
authorized person.
If you do not touch any keys for 60 seconds,
the symbol disappears automatically.
SETTING MACHINE MODE, PAY CLOSING DATE, 60 or 100
SCALE, DAILY TOTAL TIME, LCD BACKLIGHT AND
PASSWORD (MODE 1)
General Operating Procedure
1.
Press the CANCEL key for 3sec. or more. The symbol appears on the display to in-
dicate the setting mode is on. If password has been set up, enter the password before into
the setting mode. (See [6 ] on page 13)
2.
Press the
IN1
key. The
symbol appears at
MODE 1
on the display.
3.
Press the
or
key to change the items.
4. Press the
SET
key after changing each item. The display will move to next item in the
order of Machine Mode, Pay Closing Date, 60 or 100 Scale, Daily Total Time, LCD Backlight
and Password. When the
SET
key is pressed at the end, the buzzer beeps twice and the
display returns to the start of the setting mode.
C-05
may be displayed after setting the Daily Total Time and pressing the
SET
key.
When the
SET
key is pressed, all time data is deleted and the revised data is set.
When the
CANCEL
key is pressed, the revision is canceled without deleting time data.
Summary of Contents for ER-1600
Page 1: ......