11
ENGLISH
2. INSTALLING THE COMPUTER MOUNT
2.1.
Install the mount on the handlebar, to the right of the handlebar stem.
To fix it to an oversize, 31.8 diameter handlebar, just remove the 25.4 adaptor.
2.2
Install the mount
on the handlebar.
2.3
The mount can be
installed in a variety
of positions: with the
computer to the fore
or over the handlebar
stem.
2.4
Once you have
chosen the right
position, tighten the
screw with a cross-slot
screwdriver.
The Mavic team has put all its passion, experience and skill into the
design and manufacture of your computer. It will be an important aid to
you in the improvement of your performance.
Thank you for putting your trust in Mavic products.
SUMMARY
1. DESCRIPTION
11
2. INSTALLING THE COMPUTER MOUNT
11
3. FITTING/REMOVING THE COMPUTER
12
4. INSTALLING THE LOCKING LEVER/SENSOR
12
5. INSTALLING THE MAGNET
12
6. INSTALLING THE BATTERIES
12
7. DESCRIPTION OF THE DISPLAY
13
8. FUNCTION DISPLAY SEQUENCE
13
9. DIGITAL PAIRING OF THE COMPUTER
WITH THE SENSORS
13
10. PAIRING THE SECOND BIKE
13
11. SETTING THE TIME
14
12. SETTING THE ODOMETERS
14
13. SETTING THE CIRCUMFERENCE
AND THE UNIT
14
14. TRIP ZERO RESET
15
15. USING THE INTERMEDIARY STOPWATCHES
15
16. CONSULTING THE INTERMEDIARY
STOPWATCHES
15
17. CONSULTING THE DIFFERENT ODOMETERS
16
18. MAINTENANCE
16
After installation and before you use your computer for the first
time, it is IMPERATIVE to perform the digital pairing operation
described in section 9 of this guide. If you don’t, there will be no
communication between the computer and the different sensors
and your system will not work.
1.2
1.3
1.1
1.6
1. DESCRIPTION
1.1
Computer
1.2
Battery
1.3
Locking lever/sensor
1.4
All-purpose magnet
1.5
Computer mount
1.6
25.4 handlebar mount adapter
2.2
2.3.1
2.3.2
2.4
1.4
1.5
WintechES2007.indb 11
2/06/06 10:24:19
