manualshive.com logo in svg

mATX AIMB-763 Series, User Manual

Share
Download
mATX AIMB-763 Series User Manual Download Page 18

AIMB-763 User Manual

6

1.4

Before you proceed

Take note of the following precautions before you install motherboard 
components or change any motherboard settings.

Caution!

•

Unplug the power cord from the wall 
socket before touching any compo-
nent. 

•

Use a grounded wrist strap or touch a 
safely grounded object or a metal 
object, such as the power supply case, 
before handling components to avoid 
damaging them due to static electric-
ity

.

•

Hold components by the edges to 
avoid touching the ICs on them. 

•

Whenever you uninstall any compo-
nent, place it on a grounded antistatic 
pad or in the bag that came with the 
component. 

•

Before you install or remove any com-
ponent, ensure that the ATX power 
supply is switched off or the power 
cord is detached from the power sup-
ply. Failure to do so may cause severe 
damage to the motherboard, peripher-
als, and/or components.

Summary of Contents for AIMB-763 Series
























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands