Matrox Solios eV-CL, Installation And Hardware Reference

Page: 82 / 120

82 Appendix B: Technical information
On the cable adapter bracket, there is another external auxiliary I/O connector
(DBHD-15 or DB-9); this allows you to access the signals of the internal auxiliary
I/O connectors from outside the computer enclosure.
❖
Note that the Matrox Solios eV-CL hardware signal names have a ranking that
reflects the number of signals of that type, format, and direction for a path. For
example, two OPTO and two LVDS auxiliary input signals for path 0 would be
named P0_OPTO_AUX_IN0, P0_OPTO_AUX_IN1, P0_LVDS_AUX_IN0,
and P0_LVDS_AUX_IN1. Notice that the ranking of the LVDS signals also starts
at 0.
Camera Link video input connectors
On Matrox Solios eV-CLB and Matrox Solios eV-CLF, the two mini Camera Link
video input connectors are 26-pin high-density female mini Camera Link
connectors (HDR or SDR). The connectors are used to receive video input,
timing, and synchronization signals and transmit/receive communication signals
between the video source and the frame grabber. The pinout of these connectors
follow the Camera Link standard.
Auxiliary I/O
Connector 0
Camera Link
Video Input
Connector 0
Camera Link
Video Input
Connector 1
Auxiliary I/O
Connector 1
1
14
13
26