Matrox MXO, Installation And User Manual

Page: 14 / 64

4
Chapter 1, Introducing Matrox MXO
Hardware supplied for Matrox MXO
• Matrox MXO box.
• Matrox MXO cable (includes USB, DVI, and audio connectors).
• Y/C (S-Video) adapter cable.
• External AC/DC adapter and power cord.
Matrox MXO system requirements
Matrox MXO requires a Mac system with the following system configuration:
• Mac OS X Lion v10.7.
• Free USB port.
• Display card with a secondary DVI-I or Mini DisplayPort connector. Must
be able to display 1920 × 1200 at 60 Hz. A Mini DisplayPort to DVI adapter
is required for Mini DisplayPort display cards.
¦ Note You must have a secondary DVI-I or Mini DisplayPort connector for
use with Matrox MXO, and connect your primary DVI monitor to a different
connector on your display card. If you’re using an AGP-type display card, it
must run at a speed of 4x or faster.
• DVI monitor that supports a native display resolution of 1920 × 1200 is
recommended, such as the 23-inch Apple Cinema Display.
Supported programs
• Apple Final Cut Pro v7.0.3.
• Adobe After Effects v10.5.
720p at 25 fps 720p at 50 fps or PAL
720p at 29.97 fps 720p at 59.94 fps or NTSC
720p at 50 fps 720p at 50 fps or PAL
720p at 59.94 fps 720p at 59.94 fps or NTSC
1080p at 23.98 fps 1080PsF at 23.98 fps
1080p at 23.98 fps (at 29.97 fps) 1080PsF at 29.97 fps or NTSC
1080p at 25 fps 1080PsF at 25 fps or PAL
1080p at 29.97 fps 1080PsF at 29.97 fps or NTSC
1080i at 25 fps 1080i at 25 fps or PAL
1080i at 29.97 fps 1080i at 29.97 fps or NTSC
Video playback Video output