Matrox Mura MPX-4/0, User Manual

Page: 52 / 98

52 Matrox Display Wall – User Guide
Configuring your display wall layout
Using the Network API to manage your layout
Use the Matrox Network API to set up your outputs and configure the advanced features of your
display wall layout.
For more information, see the documentation included with the Network API.
Using PowerDesk to set up your multi-display layout
Setting up your multi-display layout using PowerDesk software involves entering the
number of columns and rows for your display wall layout and adjusting the settings for
your outputs (such as rotation, resolution, color palette, and refresh rate).
Mura MPX Series
To set up a multi-display layout for your Mura MPX Series card:
1 Right-click your Windows desktop and select
Launch Matrox PowerDesk
. From the
main interface of Matrox PowerDesk, click
Multi-Display Setup
.
2 Under
Basic configurations
, select
Use stretched mode
.
3 Enter the number of
Columns
and
Rows
for your multi-display setup, then click
OK
.
4 Preview your setup in the work area. If you’re satisfied, click
OK
or
Apply
to apply your
multi-display layout. Otherwise, click
Cancel
.
Depending on your installation and connection, you may need to manually rearrange
the outputs of your multi-display layout in PowerDesk to match the physical layout of
your display wall.
For more information on setting up multiple displays, see Matrox PowerDesk help.
C-Series
To set up a multi-display layout for your C900 or C680 card:
1
Right-click your Windows desktop and select
Launch Matrox PowerDesk
. From the
main interface of Matrox PowerDesk, click
Multi-Display Setup
.
2
Select a multi-display mode:
C900 – Click
Set up 3x3 configuration
.