Matrox Mura D-Series, System Builder'S Manual

Page: 38 / 88

38 Matrox Display Wall – System Builder’s Guide
Portwell M8030
Configurations
D-Series based controllers Third-party based controllers
Validated Yes No foreseeable compatibility issues
Maximum number of cards
supported
8
Maximum supported
Mura IPX Series
7
Maximum supported
D-Series
4
Motherboard PBPE-09A-MT (Backplane), ROBO-6911VG2AR (SHB)
Chipset Intel C236
Processor Intel® Core™ i7-6700 CPU @ 3.40 GHz, 3408 MHz, 4 Core(s)
Heatsink (for CPU) LGA 1151
System BIOS version 90821T00,2019-08-21
System memory 32 GB DDR4 SODIMM
Chassis 4U rack-mount
Power supply 950 W redundant power supply
PCIe expansion slots 2 PCIe x16 3.0 slots (x16 mechanical, x16 electrical)
6 PCIe x16 slots (x16 mechanical, x8 electrical)
Notes

On-board driver must be installed first prior to setting up the D-Series controller.
 In the system BIOS, go to
Advanced

Graphics Configuration

Internal Graphics

and select
Enabled
.

In the system BIOS, go to
Advanced

Chipset Configuration

Above 4G MMIO BIOS Assignment

and select
Enabled
.

The system BIOS is available at ftp://pw_m8030:YXCN54Ek@privftp.matrox.com .
 Portwell system BIOS files with “-MT” are custom BIOS versions specific to Matrox configurations.
Slot
D-Series based controller Third-party based controller
Main Option Main Option
J1 D1480 B Third-party graphics hardware
J2 D1480 A, B Third-party graphics hardware A
J3 D1480 A, B Third-party graphics hardware A
J4 D1480 A, B Third-party graphics hardware A
J5 MURAIPXI-E4JF A MURAIPXI-E4JF A
J6 MURAIPXI-E4JF A MURAIPXI-E4JF A
J7 MURAIPXI-E4JF A MURAIPXI-E4JF A
J8 MURAIPXI-E4JF A MURAIPXI-E4JF A