Matrox Mura D-Series, System Builder'S Manual

Page: 36 / 88

36 Matrox Display Wall – System Builder’s Guide
Portwell M9030 (with ROBO-8113VG2AR SHB)
Configurations
D-Series based controllers Third-party based controllers
Validated Yes No foreseeable compatibility issues
Maximum number of cards
supported
10
Maximum supported
Mura IPX Series
9
Maximum supported
D-Series
4
Motherboard Portwell PBPE-11A-MT (Backplane)
Portwell ROBO-8113VG2AR (SHB)
Chipset Intel C246
Processor Intel® Core™ i3-6100E CPU @ 3.70 GHz, 3700 MHz
Heatsink (for CPU) LGA 1151
System BIOS version R1.00.E0, 2019-12-16
System memory 32 GB DDR4
Chassis 4U rack-mount
Power supply 950 W redundant power supply
PCIe expansion slots 10 PCIe x16 2.0 slots (x16 mechanical, x16 electrical)
Notes

In the system BIOS, go to
Advanced

Graphics Configuration

Internal Graphics

and select
Disabled
.
 In the system BIOS, go to
Advanced

Chipset Configuration

Above 4G MMIO BIOS Assignment

and select
Enabled .
 In the system BIOS, go to
Advanced

Chipset Configuration

Above 4G Decoding

and select
Enabled
.

The system BIOS is available at ftp://portwell_bios:xQGnkWnQ@privftp.matrox.com .
 Portwell system BIOS files with “-MT” are custom BIOS versions specific to Matrox configurations.
Slot
D-Series based controller Third-party based controller
Main Option Main Option
J1 D1480 Third-party graphics hardware
J2 MURAIPXI-E4JHF A MURAIPXI-E4JHF A
J3 D1480 A, B Third-party graphics hardware A
J4 MURAIPXI-E4JHF A MURAIPXI-E4JHF A
J5 MURAIPXI-E4JHF A MURAIPXI-E4JHF A
J6 D1480 A, B Third-party graphics hardware A
J7 MURAIPXI-E4JHF A MURAIPXI-E4JHF A
J8 D1480 A, B Third-party graphics hardware A
J9 MURAIPXI-E4JHF A MURAIPXI-E4JHF A
J10 MURAIPXI-E4JHF A MURAIPXI-E4JHF A