Matrox Mura D-Series, System Builder'S Manual

Page: 14 / 88

14 Matrox Display Wall – System Builder’s Guide
Validated systems
The following systems have been validated by Matrox to work with the Matrox Mura IPX Series and the Matrox D-Series (D1450 and D1480)
products.
Before you begin
To ensure optimal performance, read the following guidelines before installing your Matrox graphics hardware.
D1450 / D1480 based video wall system
 D-Series and Mura IPX Series – Insert these cards in the PCIe ×16 slots that are ×16 /×8 electrical.
 Console display – To add a console display to your D-Series based system, you can use the following graphics cards in a PCIe ×4
slot:
 Matrox M9148 LP PCIe x16
 Matrox M9140 LP PCIe x16
 Matrox M9138 LP PCIe x16
 Matrox M9128 LP PCIe ×16
 Matrox M9120 Plus LP PCIe ×16
 Matrox M9120 Plus LP PCIe x1
 Matrox M9120 PCIe x16
 AMD Radeon WX2100
 AMD Radeon Vega 8 (onboard)
 ASPEED AST2500 (onboard)
 Intel® HD Graphics 530 (onboard)
 Intel® HD Grap hics 630 (onboard)
 Intel® UHD Graphics 630 (onboard)
 NVIDIA® GeForce GT710
 NVIDIA® Quadro P600
 NVIDIA® Quadro K620
Note: Ensure that you have the following default settings to launch the Windows 10 operating system:
 In the system BIOS main page, go to
Boot Tab

Boot Mode Select

and select
UEFI
.
 In the system BIOS main page, go to
Advanced Tab

Secure Boot

CSM Support

and select
Disable
.
Note: Always insert your D1450 and D1480 in the PCIe® 2.0 / 3.0 ×16 slots and your Mura IPX Series cards in the PCIe® 2.0 / 3.0
×16 or ×8 slots (×16 or ×8 electrical).
Note: To avoid possible problems, we recommend you use only Matrox PowerDesk software to change your display settings. Third-
party console displays can only be used in independent mode.
Note: Console is supported with 3.05 driver onwards.