Matrox Monarch LCS, User Manual, Page: 73 / 106

61
Device page
up shared folders for Windows or Mac OS, see Appendix B, “Sharing a
network folder,” on page 71 .
b Enter the network Domain if the Monarch is not on the same domain.
c
Enter the network Username (if applicable).
d Enter the network Password (if applicable).
4
If you selected FTP or sFTP in step 2 , configure the following settings:
a Enter the Host .
b
Enter the Username (if applicable).
c Enter the Password (if applicable).
d
Enter the Port if you want to use a different port than the default 21 for
FTP or 22 for sFTP (e.g. if the port is being used by another application).
5 Click Apply.
Your Source and Destination settings are configured.
Using Manual File Management
Use Manual File Management when you want direct control over how your
Monarch files are transferred or deleted.
¦ Note
If you have not already configured your file source and file network
destination, follow the steps described in “Configuring your Source and
Destination” on page 60 .
• Manual file transfer:
$
Click Transfer to transfer only the Monarch files that have not yet been
transferred to your specified network location.
$
Click Transfer All to transfer all Monarch files from the local storage to
your specified network location.
$
Click Stop to stop a transfer in progress.
During the transfer, the “file transferring” indicator will display in the
Command Center side menu and the encoder LED will blink, changing from
red to blue (see
“Using the Command Center side menu” on page 24 ).
• Manual file delete:
$
Click Delete to delete only the Monarch files that have already been
transferred to your specified network location.
$
Click Delete All to delete all Monarch files on the local storage.