Matrox Monarch LCS, User Manual, Page: 61 / 106

49
Settings page
folders. For more information on how to set up shared folders for Windows
or Mac OS, see
Appendix B, “Sharing a network folder,” on page 71 .
¡ Important
Blank spaces are not supported in the base name. Use
underscores in place of blank spaces. For example, enter Recording1_Stage1
instead of Recording1 Stage1 as the base name for the file.
• Domain, Username, and Password When recording your source input
to a network location (see Media ) and Monarch LCS is not on the same
domain as the network, enter the network domain. If required, also enter the
Username and Password that is used to access the network.
Save/Load tab
The Monarch LCS lets you save up to eight profiles that you can load at any time.
The profiles contain all the settings you selected in the
Production and Encoder
tabs. To access the Save/Load tab, open the Monarch LCS Command Center
(see “Accessing the Command Center” on page 24 ), click Settings , and then
click Save/Load .
The
Save/Load
tab opens with the current settings (set in the
Production
and
Encoder
tabs) displayed. You can save the current settings to a new profile, or
save over a previously saved profile. The following sections explain how.
¡ Important Please note the following: