Matrox Monarch LCS, User Manual, Page: 51 / 106

39
Settings page
the encoder with the Open Capture option selected. Otherwise, if Open
Capture is selected for both encoders, the Open Capture XML file is
saved on the destination media for Encoder 1 .
$
It is recommended to record to the same destination when recording in
Dual Isolated mode. For more information, see “Configuring Dual
Isolated mode” on page 31 .
Please note the following about Open Capture:
$
File segmentation is not supported when recording with the Open
Capture option. For more information, see File Segment Duration .
$
Open Capture XML metadata files are also transferred when using the
File Transfer feature; however, the Monarch will only transfer the files
found on the selected media (even if a video referenced in the Open
Capture XML file is located on another USB/SD card).
$
When recording Open Capture files in Dual Isolated mode where video
files are recorded to two different media (USB/SD card), it is
recommended that both files be recorded on the same media so that, when
needed, the transfer of all associated content be done in the same process.
$
If it is not possible to record to the same drive, in order to minimize the
chance of creating “orphan” Open Capture XML or video files in file
transfer destination folder, it is recommend that you transfer each Open
Capture XML file as soon as possible following the transfer of the parent
video file(s).
For more information on transferring, see “File Management tab” on
page 59 .
RTSP Real-time Streaming Protocol: A network control protocol for media
servers, controlling media sessions between end points.
RTMP Real-time Messaging Protocol: A popular protocol for transmitting
audio, video, and data with Flash media. When RTMP mode is selected, another
drop-down exposes three selections:
• Default Streams with an optimized methodology for communicating with
RTMP servers (recommended for most RTMP streaming).
• Legacy This uses a RTMP streaming protocol identical to those used in
older Monarch releases (use this option if you have difficulty using Default
with another RTMP protocol).