Monarch EDGE Control Hub configuration
| 52 |
Part # V11470-301-0101
Last updated: July 27, 2020
•
Download device audits
This file contains information on the user interactions
with your Monarch EDGE devices for troubleshooting purposes.
Managing configurations
This section describes the
Manage Configurations
settings in Monarch EDGE Control Hub.
•
Save
Save your Monarch EDGE’s config-
uration settings.
•
Select
Select and load a previously-saved
configuration, or load the Monarch EDGE’s default configuration.
•
Edit
Rename or delete a previously-saved configuration. You can also directly edit
the settings by editing the XML in the
.fav
file that is exported.
•
Export
Export your configuration settings to your computer.
•
Import
Import configuration settings from your computer.
Grouping Monarch EDGE devices
From the main Monarch EDGE Control Hub page, you can group devices together into Logical
groups or Sync groups.
Logical groups:
These are standard groups of any number of Monarch EDGE Encoders or
Decoders. This type of grouping makes it easier to monitor your devices in the Control
Hub user interface, especially when you have many devices in many different locations. You
can also group devices that are paired. Other than visually, this grouping has no other effect
on the devices themselves.
Sync groups:
These are groups of Monarch EDGE Encoders only, Sync groups are not
related to logical groups in any way; that is, Monarch EDGE Encoders that belong to one
sync group can be found in different logical groups. Sync groups share a common time-
stamp value to allow for synchronization of streams by decoders (SRT and MPEG-2 TS
only). Devices in a Sync group will have an SG# displayed depending on how many groups
you have (e.g. SG1, SG2, etc).
To group devices together, right-click any of the devices on the main page and then select
Move
to group
for a Logical group, or select
Move to sync group
to group encoders together for
stream synchronization. You are able to create your groups from the right-click menu.