manualshive.com logo in svg

Matrox Monarch EDGE Series, Installation And User Manual, Page: 17 / 78

Share
Download
Matrox Monarch EDGE Series Installation And User Manual Download Page 17

Hardware connections

|   6   |

Part # V11470-301-0101

Last updated: July 27, 2020

Matrox Monarch EDGE front connections

The Matrox Monarch EDGE 8-bit Encoder is shown for illustration purposes only. The infor-
mation below applies to all versions of Monarch EDGE.

Connector

Description

1

USB port 1

For internal use only.

2

USB port 2

For internal use only.

3

RESET

Reboots the Monarch EDGE with a short press, or resets to fac-
tory default settings with a long press of about five seconds (until 
green light flashes). 
A factory reset will also remove any user accounts or environ-
ment administrator accounts associated to this Monarch EDGE. 
For more information, see "

Environment administrator accounts

" 

on page 

20

. 

NOTE

Pressing the Reset button too long will cause the 

Monarch EDGE to enter maintenance mode (amber light). This 
mode is used for internal purposes only. If this occurs, reboot the 
EDGE and try the factory reset again.

4

Front  Panel  Buttons

Monarch EDGE front panel buttons are used to cycle through the 
information on the LCD display. For more information on how 
the front panel works, see "

Matrox Monarch EDGE front panel

" 

on page 

9

.

5

LINE OUT

Connect your headphones to this connector.

6

LINE IN

Not currently supported.

1

2

3

4

5 6

Summary of Contents for Monarch EDGE Series















































































Reviews:

No comments