Matrox MC-100, User Manual, Page: 22 / 52

14
Chapter 3, Using Your Matrox MC-100 Hardware
Accessing the OSD main menu
The Matrox MC-100 on-screen display (OSD) main menu is accessed using the
OSD buttons. The OSD main menu allows you to set the input, output, and 3D
settings, and allows you to access the various selection modes (see
“Using the
MC-100 selection modes” on page 21 ).
° To access the Matrox MC-100 OSD main menu:
1
Make sure that power is supplied to Matrox MC-100 (see “Powering Matrox
MC-100” on page 6 ), and you have at least one SDI or HDMI output display
device connected to Matrox MC-100 (see “Connecting input and output
devices” on page 8 ).
¦ Note By default, the OSD will appear on the display device connected to
MC-100’s HDMI output only. To hide the OSD on the HDMI output, or to
display it on the SDI outputs, you must set the MC-100 DIP switches
accordingly (see
“Using the MC-100 DIP switches” on page 11 ).
2
Press any OSD button on the Matrox MC-100 unit. The Matrox MC-100
OSD main menu will appear on the display device connected to MC-100’s
SDI and/or HDMI output. Select
EXIT to close the OSD.