Matrox Matrox Rapixo CXP Installation And Hardware Reference Download | Manualshive

Page: 74 / 76

background image

AVERTISSEMENT

: Ces appareils sont des produits informatiques de Classe A. Lorsque ces appareils sont utilisés

dans un environnement résidentiel, ces produits peuvent entraîner des interférences radioélectriques. Dans ce
cas, l'usager peut être prié de prendre des mesures correctives appropriées.

This device complies with Directive 2014/30/EU for Class A digital devices. They have been tested and found
to comply with EN55032/CISPR32 and EN55024/CISPR24 when installed in a typical class A compliant host
system. It is assumed that these devices will also achieve compliance in any Class A compliant system.

Ces unités sont conformes à la Directive 2014/30/EU pour les unités numériques de Classe A. Les tests effectués
ont prouvé qu’elles sont conformes aux normes EN55032/CISPR32 et EN55024/CISPR24 lorsqu’elles sont
installées dans un système hôte typique de la Classe A. On suppose qu’ils présenteront la même compatibilité
dans tout système compatible de la Classe A.

Directive on Waste Electrical and Electronic Equipment

(WEEE)

Europe

(English) European user’s information – Directive on Waste Electrical

and Electronic Equipment (WEEE)

Please refer to the Matrox Web site (

www.matrox.com/environment/weee

) for recycling

information.

(Français) Informations aux utilisateurs Européens – Règlementation

des déchets d’équipements électriques et électroniques (DEEE)

Se référer au site Web de Matrox (

www.matrox.com/environment/weee

) pour l’information concernant le

recyclage.

(Deutsch) Information für europäische Anwender – Europäische Regelungen zu Elektro- und
Elektronikaltgeräten

(WEEE)

Bitte wenden Sie sich an dem Matrox-Website (

www.matrox.com/environment/weee

) für Recycling

Informationen.

(Italiano) Informazioni per gli utenti europei – Direttiva sui rifiuti di apparecchiature elettriche

ed elettroniche (RAEE)

Si prega di riferirsi al sito Web Matrox (

www.matrox.com/environment/weee

) per le informazioni di riciclaggio.

«
...
72
73
74
75
76
»

Summary of Contents for Matrox Rapixo CXP













































































Reviews:

No comments

Related manuals for Matrox Rapixo CXP

Brand: Telit Wireless Solutions Pages: 56

Powered RS-232 2-Port PCI Card

Brand: National Instruments Pages: 11

JFLEX-Multimedia

Brand: Kontron Pages: 21

MIPort Universal PCI Cards 3PCIOU1

Brand: B&B Electronics Pages: 4

Brand: TerraTec Pages: 23

Brand: Gigabyte Pages: 35

Brand: Bewator Pages: 2

Brand: Elitegroup Computer Systems Pages: 16

Brand: StarTech.com Pages: 11

Brand: G4S Pages: 2

Brand: Digitus Pages: 4

Brand: Farpointe Data Pages: 2

Brand: Farpointe Data Pages: 2

ThinkStation NVS 315

Brand: Lenovo Pages: 30

Brand: Lenovo Pages: 30

AMD 7450 DP DVI-I

Brand: Lenovo Pages: 30

Brand: Broadcom Pages: 16

Brand: Broadcom Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands