Matrox Matrox Rapixo CXP Installation And Hardware Reference Download | Manualshive

Page: 73 / 76

background image

Regulatory Compliance

FCC Compliance Statement

Warning

Changes or modifications to these devices not expressly approved by the party responsible for the compliance
could void the user's authority to operate this equipment.

The use of shielded cables for connections of these devices to other peripherals is required to meet the regulatory
requirements.

Note

These devices comply with Part 15 of FCC Rules. Operation is subject to the following two conditions:

1. These devices may not cause harmful interference, and

2. These devices must accept any interference received, including interference that may cause undesired

operation.

This equipment has been tested and found to comply with the limits for Class A digital devices, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of these devices in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his/her own expense.

Innovation, Science and Economic Development Canada

Compliance Statement

These digital apparatuses do not exceed the Class A limits for radio noise emission from digital apparatuses set
out in the Radio Interference Regulations of Innovation, Science and Economic Development Canada (ISED).

Ces appareils numériques n’émettent pas de bruits radioélectriques dépassant les limites applicables aux appareils
numériques de Classe A prescrites dans le Règlement sur le brouillage radioélectrique édicté par Innovation,
Sciences et Développement Économique Canada (ISDE).

EU Notice (European Union)

WARNING

: These are class A products. In a domestic environment these products may cause radio interference

in which case the user may be required to take adequate measures.

«
...
71
72
73
74
75
...
»

Summary of Contents for Matrox Rapixo CXP













































































Reviews:

No comments

Related manuals for Matrox Rapixo CXP

CHROME 400 Series

Brand: S3 Graphics Pages: 67

Brand: ICS Advent Pages: 22

Brand: DAQ system Pages: 21

Brand: GlobespanVirata Pages: 12

Brand: Narvitech Pages: 16

Brand: Gigabyte Pages: 38

Brand: PROLiNK Pages: 64

USB CompactFlash Reader/Writer REX-CF03

Brand: Ratoc Systems Pages: 57

Brand: Datapath Pages: 70

Brand: IDTECH Pages: 13

Brand: Hama Pages: 42

CHIPDRIVE micro 100

Brand: TOWITOKO Pages: 8

Brand: Lindy Pages: 2

Brand: Lindy Pages: 9

108618 - Imatumi Media Reader Card

Brand: LaCie Pages: 24

Brand: Solid State Logic Pages: 29

Brand: Hard software Pages: 18

Brand: UIC Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands