Matrox Matrox Rapixo CXP Installation And Hardware Reference Download Page 17 | Manualshive

Page: 17 / 76

Matrox Matrox Rapixo CXP Installation And Hardware Reference Download Page 17

Installation 17

Installation

The installation procedure consists of the following steps:

1. Complete the hardware installation procedure described in

Chapter 2: Hardware

2. Complete the software installation procedure described in the documentation

accompanying your software package.

More information

For information on using multiple Matrox Rapixo CXP boards, refer to

3: Using multiple Matrox Rapixo CXP boards

For in-depth hardware information, refer to

Chapter 4: Matrox Rapixo CXP

hardware reference

; whereas for a summary of this information, as well as

environmental and electrical specifications, and connector pinout descriptions,
see

Appendix B: Technical information

.

This manual occasionally makes reference to a MIL-Lite function. However,
anything that can be accomplished with MIL-Lite can also be accomplished with
MIL.

Need help?

If you experience problems during installation or while using this product, refer
to the support page on the Matrox Imaging web site:
www.matrox.com/imaging/support. This page provides answers to frequently
asked questions, as well as offers registered customers additional ways of obtaining
support.

If your question is not addressed and you are currently registered with the MIL
maintenance program, you can contact technical support. To do so, you should
first complete and submit the online Technical Support Request Form, accessible
from the above-mentioned page. Once the information is submitted, a Matrox
support agent will contact you shortly thereafter by email or phone, depending
on the problem.

«
...
15
16
17
18
19
...
»

Summary of Contents for Matrox Rapixo CXP













































































Reviews:

No comments